PRODOTTI
Frese senza taglio in testa per Materiali Compositi
Utensili per lavorazione di Kevlar e materiali compositi — COD.411
Materiali idonei
AcciaiAcciai INOXGhiseGrafiteL.LeggereNon ferrosiTitanioHRSAHRC < 54HRC > 54
ConsigliatoAccettabileSconsigliato
| codice | d1h6 | inches | d2h6 | inches2 | l1 | l2 |
|---|---|---|---|---|---|---|
| 411.0400_* | 4,0 | — | 4,0 | — | 45 | 14 |
| 411.0500_* | 5,0 | — | 5,0 | — | 51 | 18 |
| 411.0600_* | 6,0 | — | 6,0 | — | 72 | 30 |
| 411.0635_* | 6,35 | 1/4 | 6,35 | 1/4 | 76 | 32 |
| 411.0794_* | 7,94 | 5/16 | 7,94 | 5/16 | 76 | 30 |
| 411.0800_* | 8,0 | — | 8,0 | — | 76 | 30 |
| 411.0952_* | 9,53 | 3/8 | 9,53 | 3/8 | 76 | 30 |
| 411.1000_* | 10,0 | — | 10,0 | — | 76 | 30 |
| 411.1200_* | 12,0 | — | 12,0 | — | 83 | 34 |
| 411.1270_* | 12,7 | 1/2 | 12,7 | 1/2 | 83 | 36 |
Schema tecnico
